G-flat locrian chords

The Solution below shows the G-flat locrian mode triad chords (i^o, II, iii, iv, V, VI, vii) on a piano, with mp3 and midi audio.

The Lesson steps then explain the triad chord construction from this mode, and how to name the quality of each chord based on note intervals.

For a quick summary of this topic, and to see the chord quality chart for this mode, have a look at Mode chord.

Solution - 7 parts

1. G-flat locrian chord i^o

Chord identification

The G-flat locrian chord i^o is the Gb diminished chord, and contains the notes Gb, Bbb, and Dbb.

This tonic chord's root / starting note is the 1st note (or scale degree) of the G-flat locrian mode.

The roman numeral for number 1 is 'i' and is used to indicate this is the 1st triad chord in the mode. Just like a minor chord, the diminished chord is constructed using a minor third interval, so the roman numeral is shown in lower case.

The diminished symbol '^o' is placed after the roman numerals to indicate this is a diminished chord.

2. G-flat locrian chord II

Chord identification

The G-flat locrian chord II is the Abb major chord, and contains the notes Abb, Cb, and Ebb.

This supertonic chord's root / starting note is the 2nd note (or scale degree) of the G-flat locrian mode.

The roman numeral for number 2 is 'II' and is used to indicate this is the 2nd triad chord in the mode. It is in upper case to denote that the chord is a major chord.

3. G-flat locrian chord iii

Chord identification

The G-flat locrian chord iii is the Bbb minor chord, and contains the notes Bbb, Dbb, and Fb.

This mediant chord's root / starting note is the 3rd note (or scale degree) of the G-flat locrian mode.

The roman numeral for number 3 is 'iii' and is used to indicate this is the 3rd triad chord in the mode. It is in lower case to denote that the chord is a minor chord.

4. G-flat locrian chord iv

Chord identification

The G-flat locrian chord iv is the Cb minor chord, and contains the notes Cb, Ebb, and Gb.

This subdominant chord's root / starting note is the 4th note (or scale degree) of the G-flat locrian mode.

The roman numeral for number 4 is 'iv' and is used to indicate this is the 4th triad chord in the mode. It is in lower case to denote that the chord is a minor chord.

5. G-flat locrian chord V

Chord identification

The G-flat locrian chord V is the Dbb major chord, and contains the notes Dbb, Fb, and Abb.

This dominant chord's root / starting note is the 5th note (or scale degree) of the G-flat locrian mode.

The roman numeral for number 5 is 'V' and is used to indicate this is the 5th triad chord in the mode. It is in upper case to denote that the chord is a major chord.

6. G-flat locrian chord VI

Chord identification

The G-flat locrian chord VI is the Ebb major chord, and contains the notes Ebb, Gb, and Bbb.

This submediant chord's root / starting note is the 6th note (or scale degree) of the G-flat locrian mode.

The roman numeral for number 6 is 'VI' and is used to indicate this is the 6th triad chord in the mode. It is in upper case to denote that the chord is a major chord.

7. G-flat locrian chord vii

Chord identification

The G-flat locrian chord vii is the Fb minor chord, and contains the notes Fb, Abb, and Cb.

This subtonic chord's root / starting note is the 7th note (or scale degree) of the G-flat locrian mode.

The roman numeral for number 7 is 'vii' and is used to indicate this is the 7th triad chord in the mode. It is in lower case to denote that the chord is a minor chord.

Lesson steps

1. Piano key note names

The white keys are named using the alphabetic letters A, B, C, D, E, F, and G, which is a pattern that repeats up the piano keyboard.

Every white or black key could have a flat(b) or sharp(#) accidental name, depending on how that note is used. In a later step, if sharp or flat notes are used, the exact accidental names will be chosen.

The audio files below play every note shown on the piano above, so middle C (marked with an orange line at the bottom) is the 2nd note heard.

2. G-flat locrian mode notes

The piano keyboard below contains the notes of the G-flat locrian mode.

Starting from the 1st mode note, each lesson step below will take each note in turn and construct a triad chord using that note as the root / starting note of that chord.

The triad chord will be built using only the notes of the mode we are interested in.

Identifying the 3 notes in the chord

Triad chords are built using the 1st, 3rdand 5th notes of the mode, so the first triad below will constructed a chord using notes Gb, Bbb and Dbb.

The second triad below will repeat this, but this time starting on the 2nd note, so its notes will be Abb, Cb and Ebb - ie. the 1st, 3rd and 5th positions relative to that 2nd root note.

This pattern is repeated for all 7 notes in the mode, resulting in 7 triad chords.

Identifying the chord quality

Although the above method identifies each triads notes from the mode used - it does not identify the complete chord name including its quality.

Should each triad that we build be called major, minor, augmented, or diminished ? Every triad chord must have one of these quality names.

To decide the name the chord quality, each step below will use note intervals to calculate how many half-tones / semitones / piano keys between the root and the 3rd (and 5th).

Taken together, the combination of the 3rd and 5th note intervals will define the complete triad quality name.

The steps below will show how this works for each triad in turn, but in practice it might just be easier to memorize the triad quality table in the Mode chord summary for each mode type.

3. 1st triad chord in G-flat locrian mode

Identifying the 3 notes in the chord

The table below shows the G-flat locrian mode, ordered to show the 1st note as the first column in the table.

To identify the triad chord note names, use the 1st, 3rd, and 5th columns / scale degrees, which are notes Gb, Bbb, and Dbb.

Identifying the chord quality

To identify the triad chord quality that has these notes, begin by counting the number of half-tones / semitones between the root and each of the notes.

For the 3rd Interval (note 2 on the diagram) the distance between Gb and Bbb is 3 half-tones.

Now look at the complete Note interval table, and identify the note interval that has a distance of 3 half-tones (first column), and with an interval no. of 3 (last column).

The note interval name for the 3rd note / scale degree is therefore minor, also called m3 for short. More details of this interval are at Gb-min-3rd.

Repeating this for the 5th note / scale degree, the distance between Gb and Dbb is 6 half-tones, and the note interval name is diminished (d5). More details of this interval are at Gb-dim-5th.

Finally, we have the name of the two note intervals of this triad, and can now lookup the name of the triad chord quality having these intervals.

Looking at the Triad chord table, the name of the triad chord quality having minor(m3) and diminished(d5) note intervals is diminished.

And so the complete triad chord name prefixes the root note, Gb, onto this quality, giving us the Gb diminished chord.

Scale chord names using a,b and c notation

The chord symbol i^o could be followed by the letter a to indicate that it is Gb diminished chord in root position (ie not inverted) - G-flat locrian mode chord i^oa.

Instead, i^o could be followed by the letter b to indicate that it is Gb diminished chord in 1st inversion - G-flat locrian mode chord i^ob.

Finally, letter c could be used to indicate that it is Gb diminished chord in 2nd inversion - G-flat locrian mode chord i^oc.

Scale chord names using figured bass notation

In place of the b or c symbols above, figured bass symbols could be used to indicate inversions after the chord number symbols i^o:

So in this key, i^o6 refers to the Gb diminished chord in 1st inversion, and i^o64 refers to the Gb diminished chord in 2nd inversion.

The next scale chord

The next step will need to calculate the triad chord whose root / starting note is next mode note.

To do this, the first column we used in this step, Gb, will be moved to the final column of the table.

4. 2nd triad chord in G-flat locrian mode

Identifying the 3 notes in the chord

The table below shows the G-flat locrian mode, ordered to show the 2nd note as the first column in the table.

To identify the triad chord note names, use the 1st, 3rd, and 5th columns / scale degrees, which are notes Abb, Cb, and Ebb.

Identifying the chord quality

To identify the triad chord quality that has these notes, begin by counting the number of half-tones / semitones between the root and each of the notes.

For the 3rd Interval (note 2 on the diagram) the distance between Abb and Cb is 4 half-tones.

Now look at the complete Note interval table, and identify the note interval that has a distance of 3 half-tones (first column), and with an interval no. of 3 (last column).

The note interval name for the 3rd note / scale degree is therefore major, also called M3 for short. More details of this interval are at Abb-maj-3rd.

Repeating this for the 5th note / scale degree, the distance between Abb and Ebb is 7 half-tones, and the note interval name is perfect (P5). More details of this interval are at Abb-perf-5th.

Finally, we have the name of the two note intervals of this triad, and can now lookup the name of the triad chord quality having these intervals.

Looking at the Triad chord table, the name of the triad chord quality having major(M3) and perfect(P5) note intervals is major.

And so the complete triad chord name prefixes the root note, Abb, onto this quality, giving us the Abb major chord.

Scale chord names using a,b and c notation

The chord symbol II could be followed by the letter a to indicate that it is Abb major chord in root position (ie not inverted) - G-flat locrian mode chord IIa.

Instead, II could be followed by the letter b to indicate that it is Abb major chord in 1st inversion - G-flat locrian mode chord IIb.

Finally, letter c could be used to indicate that it is Abb major chord in 2nd inversion - G-flat locrian mode chord IIc.

Scale chord names using figured bass notation

In place of the b or c symbols above, figured bass symbols could be used to indicate inversions after the chord number symbols II:

So in this key, II6 refers to the Abb major chord in 1st inversion, and II64 refers to the Abb major chord in 2nd inversion.

The next scale chord

The next step will need to calculate the triad chord whose root / starting note is next mode note.

To do this, the first column we used in this step, Abb, will be moved to the final column of the table.

5. 3rd triad chord in G-flat locrian mode

Identifying the 3 notes in the chord

The table below shows the G-flat locrian mode, ordered to show the 3rd note as the first column in the table.

To identify the triad chord note names, use the 1st, 3rd, and 5th columns / scale degrees, which are notes Bbb, Dbb, and Fb.

Identifying the chord quality

To identify the triad chord quality that has these notes, begin by counting the number of half-tones / semitones between the root and each of the notes.

For the 3rd Interval (note 2 on the diagram) the distance between Bbb and Dbb is 3 half-tones.

Now look at the complete Note interval table, and identify the note interval that has a distance of 3 half-tones (first column), and with an interval no. of 3 (last column).

The note interval name for the 3rd note / scale degree is therefore minor, also called m3 for short. More details of this interval are at Bbb-min-3rd.

Repeating this for the 5th note / scale degree, the distance between Bbb and Fb is 7 half-tones, and the note interval name is perfect (P5). More details of this interval are at Bbb-perf-5th.

Finally, we have the name of the two note intervals of this triad, and can now lookup the name of the triad chord quality having these intervals.

Looking at the Triad chord table, the name of the triad chord quality having minor(m3) and perfect(P5) note intervals is minor.

And so the complete triad chord name prefixes the root note, Bbb, onto this quality, giving us the Bbb minor chord.

Scale chord names using a,b and c notation

The chord symbol iii could be followed by the letter a to indicate that it is Bbb minor chord in root position (ie not inverted) - G-flat locrian mode chord iiia.

Instead, iii could be followed by the letter b to indicate that it is Bbb minor chord in 1st inversion - G-flat locrian mode chord iiib.

Finally, letter c could be used to indicate that it is Bbb minor chord in 2nd inversion - G-flat locrian mode chord iiic.

Scale chord names using figured bass notation

In place of the b or c symbols above, figured bass symbols could be used to indicate inversions after the chord number symbols iii:

So in this key, iii6 refers to the Bbb minor chord in 1st inversion, and iii64 refers to the Bbb minor chord in 2nd inversion.

The next scale chord

The next step will need to calculate the triad chord whose root / starting note is next mode note.

To do this, the first column we used in this step, Bbb, will be moved to the final column of the table.

6. 4th triad chord in G-flat locrian mode

Identifying the 3 notes in the chord

The table below shows the G-flat locrian mode, ordered to show the 4th note as the first column in the table.

To identify the triad chord note names, use the 1st, 3rd, and 5th columns / scale degrees, which are notes Cb, Ebb, and Gb.

Identifying the chord quality

To identify the triad chord quality that has these notes, begin by counting the number of half-tones / semitones between the root and each of the notes.

For the 3rd Interval (note 2 on the diagram) the distance between Cb and Ebb is 3 half-tones.

Now look at the complete Note interval table, and identify the note interval that has a distance of 3 half-tones (first column), and with an interval no. of 3 (last column).

The note interval name for the 3rd note / scale degree is therefore minor, also called m3 for short. More details of this interval are at Cb-min-3rd.

Repeating this for the 5th note / scale degree, the distance between Cb and Gb is 7 half-tones, and the note interval name is perfect (P5). More details of this interval are at Cb-perf-5th.

Finally, we have the name of the two note intervals of this triad, and can now lookup the name of the triad chord quality having these intervals.

Looking at the Triad chord table, the name of the triad chord quality having minor(m3) and perfect(P5) note intervals is minor.

And so the complete triad chord name prefixes the root note, Cb, onto this quality, giving us the Cb minor chord.

Scale chord names using a,b and c notation

The chord symbol iv could be followed by the letter a to indicate that it is Cb minor chord in root position (ie not inverted) - G-flat locrian mode chord iva.

Instead, iv could be followed by the letter b to indicate that it is Cb minor chord in 1st inversion - G-flat locrian mode chord ivb.

Finally, letter c could be used to indicate that it is Cb minor chord in 2nd inversion - G-flat locrian mode chord ivc.

Scale chord names using figured bass notation

In place of the b or c symbols above, figured bass symbols could be used to indicate inversions after the chord number symbols iv:

So in this key, iv6 refers to the Cb minor chord in 1st inversion, and iv64 refers to the Cb minor chord in 2nd inversion.

The next scale chord

The next step will need to calculate the triad chord whose root / starting note is next mode note.

To do this, the first column we used in this step, Cb, will be moved to the final column of the table.

7. 5th triad chord in G-flat locrian mode

Identifying the 3 notes in the chord

The table below shows the G-flat locrian mode, ordered to show the 5th note as the first column in the table.

To identify the triad chord note names, use the 1st, 3rd, and 5th columns / scale degrees, which are notes Dbb, Fb, and Abb.

Identifying the chord quality

To identify the triad chord quality that has these notes, begin by counting the number of half-tones / semitones between the root and each of the notes.

For the 3rd Interval (note 2 on the diagram) the distance between Dbb and Fb is 4 half-tones.

Now look at the complete Note interval table, and identify the note interval that has a distance of 3 half-tones (first column), and with an interval no. of 3 (last column).

The note interval name for the 3rd note / scale degree is therefore major, also called M3 for short. More details of this interval are at Dbb-maj-3rd.

Repeating this for the 5th note / scale degree, the distance between Dbb and Abb is 7 half-tones, and the note interval name is perfect (P5). More details of this interval are at Dbb-perf-5th.

Finally, we have the name of the two note intervals of this triad, and can now lookup the name of the triad chord quality having these intervals.

Looking at the Triad chord table, the name of the triad chord quality having major(M3) and perfect(P5) note intervals is major.

And so the complete triad chord name prefixes the root note, Dbb, onto this quality, giving us the Dbb major chord.

Scale chord names using a,b and c notation

The chord symbol V could be followed by the letter a to indicate that it is Dbb major chord in root position (ie not inverted) - G-flat locrian mode chord Va.

Instead, V could be followed by the letter b to indicate that it is Dbb major chord in 1st inversion - G-flat locrian mode chord Vb.

Finally, letter c could be used to indicate that it is Dbb major chord in 2nd inversion - G-flat locrian mode chord Vc.

Scale chord names using figured bass notation

In place of the b or c symbols above, figured bass symbols could be used to indicate inversions after the chord number symbols V:

So in this key, V6 refers to the Dbb major chord in 1st inversion, and V64 refers to the Dbb major chord in 2nd inversion.

The next scale chord

The next step will need to calculate the triad chord whose root / starting note is next mode note.

To do this, the first column we used in this step, Dbb, will be moved to the final column of the table.

8. 6th triad chord in G-flat locrian mode

Identifying the 3 notes in the chord

The table below shows the G-flat locrian mode, ordered to show the 6th note as the first column in the table.

To identify the triad chord note names, use the 1st, 3rd, and 5th columns / scale degrees, which are notes Ebb, Gb, and Bbb.

Identifying the chord quality

To identify the triad chord quality that has these notes, begin by counting the number of half-tones / semitones between the root and each of the notes.

For the 3rd Interval (note 2 on the diagram) the distance between Ebb and Gb is 4 half-tones.

Now look at the complete Note interval table, and identify the note interval that has a distance of 3 half-tones (first column), and with an interval no. of 3 (last column).

The note interval name for the 3rd note / scale degree is therefore major, also called M3 for short. More details of this interval are at Ebb-maj-3rd.

Repeating this for the 5th note / scale degree, the distance between Ebb and Bbb is 7 half-tones, and the note interval name is perfect (P5). More details of this interval are at Ebb-perf-5th.

Finally, we have the name of the two note intervals of this triad, and can now lookup the name of the triad chord quality having these intervals.

Looking at the Triad chord table, the name of the triad chord quality having major(M3) and perfect(P5) note intervals is major.

And so the complete triad chord name prefixes the root note, Ebb, onto this quality, giving us the Ebb major chord.

Scale chord names using a,b and c notation

The chord symbol VI could be followed by the letter a to indicate that it is Ebb major chord in root position (ie not inverted) - G-flat locrian mode chord VIa.

Instead, VI could be followed by the letter b to indicate that it is Ebb major chord in 1st inversion - G-flat locrian mode chord VIb.

Finally, letter c could be used to indicate that it is Ebb major chord in 2nd inversion - G-flat locrian mode chord VIc.

Scale chord names using figured bass notation

In place of the b or c symbols above, figured bass symbols could be used to indicate inversions after the chord number symbols VI:

So in this key, VI6 refers to the Ebb major chord in 1st inversion, and VI64 refers to the Ebb major chord in 2nd inversion.

The next scale chord

The next step will need to calculate the triad chord whose root / starting note is next mode note.

To do this, the first column we used in this step, Ebb, will be moved to the final column of the table.

9. 7th triad chord in G-flat locrian mode

Identifying the 3 notes in the chord

The table below shows the G-flat locrian mode, ordered to show the 7th note as the first column in the table.

To identify the triad chord note names, use the 1st, 3rd, and 5th columns / scale degrees, which are notes Fb, Abb, and Cb.

Identifying the chord quality

To identify the triad chord quality that has these notes, begin by counting the number of half-tones / semitones between the root and each of the notes.

For the 3rd Interval (note 2 on the diagram) the distance between Fb and Abb is 3 half-tones.

Now look at the complete Note interval table, and identify the note interval that has a distance of 3 half-tones (first column), and with an interval no. of 3 (last column).

The note interval name for the 3rd note / scale degree is therefore minor, also called m3 for short. More details of this interval are at Fb-min-3rd.

Repeating this for the 5th note / scale degree, the distance between Fb and Cb is 7 half-tones, and the note interval name is perfect (P5). More details of this interval are at Fb-perf-5th.

Finally, we have the name of the two note intervals of this triad, and can now lookup the name of the triad chord quality having these intervals.

Looking at the Triad chord table, the name of the triad chord quality having minor(m3) and perfect(P5) note intervals is minor.

And so the complete triad chord name prefixes the root note, Fb, onto this quality, giving us the Fb minor chord.

Scale chord names using a,b and c notation

The chord symbol vii could be followed by the letter a to indicate that it is Fb minor chord in root position (ie not inverted) - G-flat locrian mode chord viia.

Instead, vii could be followed by the letter b to indicate that it is Fb minor chord in 1st inversion - G-flat locrian mode chord viib.

Finally, letter c could be used to indicate that it is Fb minor chord in 2nd inversion - G-flat locrian mode chord viic.

Scale chord names using figured bass notation

In place of the b or c symbols above, figured bass symbols could be used to indicate inversions after the chord number symbols vii:

So in this key, vii6 refers to the Fb minor chord in 1st inversion, and vii64 refers to the Fb minor chord in 2nd inversion.

This completes the set of all triad chords that harmonize with the G-flat locrian mode.

Related Keys and Topics